Specializing in Piezo Stages and Nanopositioning Solutions

LC.400 OEM Controllers

You are here: Home / Products / Nanopositioning Electronics / LC.400 OEM Controllers
LC400OEM LC400OEMSG
LC.400 OEM Board (1 Channel) P/N: 200683 LC.400 OEM Board for Strain Gauge Products (1 Channel) P/N:200761
LC402OEM LC402OEMSG
LC.402 OEM Board Stacked Design (2 Channels) P/N: 200729 LC.402 OEM Board Side-by-Side Design (2 Channels) P/N:200770

nPoint has many options for OEM nanopositioning electronics.  Based on the LC.400 series DSP digital control system closed-loop operation can be provided for three or more channels. Custom systems can be developed for easy integration.

nPoint controllers combine ultra low-noise driver electronics and motion sensing modules with DSP-based servo control. User-generated positioning commands are supplied via the analog BNC inputs, the USB interface, or via custom interface. nPoint's linearization technique achieves positioning linearity better than 99.97% over the entire range of travel.

The LC.400 series controllers are compatible with capacitive and strain gage sensing technology to provide the most flexible nanopositioning controller on the market. Moreover, stage calibration data and other parameters, such as control configurations, are stored in the ID-chip and are read automatically. High power amplifiers are available to provide the necessary current for high-speed applications/ high-load configurations.

Product Spec Info
Print Specs

Category:

Description

Channels Up to three, more configurations available
Resolution 20-bit
Processor 32-bit floating point DSP
Sampling Rate 24 µsec servo-loop
Interfaces USB
Analog input (-10V to 10V)
Analog monitor output (-10V to 10V)
9-pin digital I/O (with optional RS232 functionality)
High-speed parallel
AFM
Quadrature Signal
Custom Interfaces Available
Software nPoint control panel
LabVIEW and DLL drivers
Internal wave form generator
EPICS Drivers
uManager Drivers
Nikon Elements Compatible
ScanImage Compatible
Custom Software Available
HV Driver Voltage -30V to 150V piezo drive
Command Input Voltage BNC -10V to 10V analog position command signal, 0V to 10V, or custom optional
Sensor Monitor Output BNC -10V to 10V analog sensor signal, 0V to 10V, or custom optional
Sensor Type Capacitive or Strain Gage, others optional
Max Output Current 100 mA standard, up to 350 mA optional
Dimensions 106 x 67 x 172 mm (1 channel model), 185 x 67 x 240 mm (2 channel model), 260 x 88 x 264mm (3 channel model)
Cables 2m long cables to the nanopositioner (custom length cables are available)
Operating Voltage 100 – 240 VAC, 50 – 60 Hz
Operating System Microsoft Windows XP/Vista/7/8/10, Linux, Mac OS
Certification CE, UL, CAN/CSA May be Available Upon Request

Pin It on Pinterest