Raster Scanning Spiral Pattern

Raster Scanning Techniques for Photonics Applications

The nPoint LC.400 series of controllers have several internal functions for use with raster scanning.  A traditional raster scan can be generated via the simple Raster Scanning GUI used in the traditional raster scan below. Additional raster scanning patterns can be generated via the arbitrary scan capability of the controller. This provides complete flexibility for […]

Piezo Stage Orthogonality

Orthogonality Correction for Piezo Flexure Stages

nPoint is now offering an easy way for correcting the orthogonality error of XY scanners for the most demanding scanning applications. This capability is primarily used by OEM customers in applications such as Atomic Force Microscopy (AFM). An external method for measuring the orthogonality error is necessary prior to applying such correction. The AFM application […]

What is Phase Lag and How to Measure It

Understanding phase lag is important when scanning at high speeds with piezo flexure stages. This article describes the phase relationship between the command signal and the stage response. The response is monitored using the internal (in this case capacitive) sensor. The bandwidth of a system is the key element to phase lag. Using control parameters […]

RXY3-410 Nanopositioning Piezo Stage

Tip Tilt Piezo Stage Mirror Mounting

A tip tilt piezo stage provides the opportunity to dynamically scan a mirror with extreme precision and control. Piezo mirrors are used for laser beam steering and image stabilization applications. There are a variety of options built into nPoint systems for mounting purposes. Below are only a few suggestions, as custom mounting platforms and stages […]

LC.300 Series Nanopositioning Controller from nPoint

The LC.300 Series Piezo Controller is the latest addition to nPoint’s nanopositioning electronics. This new closed-loop controller is designed to address OEM applications that benefit from speed, precision, and flexibility but do not require the advanced feature set of the LC.400 Piezo Controller. LC.300 Digital Controllers are designed to operate closed-loop, flexure-guided nanopositioners, with smooth […]

Components of a Nanopositioning System

Nanopositioning systems provide the opportunity to enable many advanced applications. Their use has spread from AFMs to optics and multiple new technologies. While selecting a system can be complex at times, there are three main components that work together to provide motion on the nanoscale. Each component will briefly be discussed and can be studied […]

3715410

Tip Tilt Piezo Stage with Enhanced Precision

The RXY3-410 tip/tilt piezo stage is the latest addition to nPoint’s nanopositioning lineup.  This new stage is designed for advanced research and OEM markets where speed, precision, and flexibility are a priority. The RXY3-410 nanopositioner is a piezo driven, flexure guided stage designed for high speed and sub-microradian precision. Having a position noise of 0.2 […]

3715405

The New NPXY250-405 Piezo Stage

  The NPXY250-405 piezo stage is the latest addition to nPoint’s nanopositioning lineup.  This stage is designed as an economical XY piezo flexure stage. The NPXY250-405 nanopositioner is a piezo driven, flexure guided stage, designed for economical XY positioning and scanning. Having a position noise of 3nm with strain gauge sensors, this system provides the […]

3715258

Two New Piezo Stages from nPoint

The NPXY60-258 and the NPXY60Z20-257 piezo stages are the latest additions to nPoint’s  nanopositioning lineup.  These stages are designed for advanced research markets in need of UHV and non-magnetic positioning. Middleton, WI – May 14, 2014 – The NPXY60-258 and NPXY60Z20-257 nanopositioners are piezo driven, flexure guided stages, designed for high speed and nanometer precision. […]